Back to All tools

Wallpaper · Wall stickers · Print strips

Wallpaper & wall sticker designer

Cover a wall with your own pattern in ready-to-hang numbered strips, or make wall stickers with cut lines on print-and-cut sheets.

Wall preview

3 strips of 1370 mm · 7.20 m of material · wall 7.20 m²

Installation sequence

  1. Mark a vertical (plumb) line 1360 mm from the left corner — strip 1 hangs against it.
  2. Strip 1: 1370 × 2420 mm (wall position 0–1370 mm).
  3. Strip 2: 1370 × 2420 mm (wall position 1360–2730 mm), overlapping strip 1 by 10 mm — line up the alignment marks.
  4. Strip 3: 280 × 2420 mm (wall position 2720–3000 mm), overlapping strip 2 by 10 mm — line up the alignment marks.
  5. Trim the top and bottom at the ceiling and skirting; the number under each strip is cut off with the trim.

Room & rolls calculator

3 rolls (2 + 10% extra) · 6 drops · 4 drops per roll · 7.20 m² to cover (7.20 m² of wall)

  • Wall 1: 6 drops of 250 cm

Estimate for standard hanging: full-height drops per wall; a door or window saves only the drops it fully covers. Check the roll label (width, length, repeat and match) and order from one batch.

How it works

  1. 1

    Choose wallpaper or stickers

    Cover a wall with a pattern, or make cut-out wall stickers.

  2. 2

    Set the size

    Your wall’s width and height, or the sticker size and sheet.

  3. 3

    Pick the design

    A pattern from your library, or your own artwork.

  4. 4

    Download for print

    Numbered wallpaper strips, or a sticker sheet with cut lines.

Questions

How does the wallpaper print file work?
Enter your wall’s width and height and the roll or panel width. The design is split into numbered strips with an overlap and alignment marks, listed in installation order. Download one PDF with every strip, a ZIP of separate numbered panels (PDF and SVG), or a full-wall PNG.
Can I use my own pattern?
Yes. Every pattern you save in Pattern Design — including rangoli and mandala designs — appears in the wallpaper pattern picker. Edit it in Pattern Design and the new version is offered here.
How many rolls do I need?
The rolls calculator works out drops per roll and the number of rolls from your wall size, roll width and length, and pattern repeat, with a waste allowance.
How are wall sticker cut lines made?
Upload a PNG with a transparent background and the cut line follows the shape, with a white border of the width you choose — or cuts just inside the art when you want bleed. The cut line is a separate magenta vector path for your cutter.
Can I print many stickers on one sheet?
Yes. Choose A4, A3, SRA3 or another sheet, the margin, gap and quantity; stickers are laid out automatically (turned when more fit) with registration marks for print-and-cut machines.
Are my files uploaded?
No. Everything is made in your browser and saved on your device.