Separation & Halftone Studio

Separations and films, ready for the screen.

Spot or CMYK plates, underbase, halftone films

Open a picture (PNG with a transparent background works best for garments).

Open your artwork, choose spot colours for screen printing or CMYK process, set the print size, screen ruling, angles and dot shape, and download one film per ink.

How it works

  1. 1

    Open artwork

    PNG or JPG — transparent PNGs work best for garments.

  2. 2

    Separate

    Spot inks (with optional underbase) or CMYK with the ink-limit map.

  3. 3

    Set the screen

    LPI, angle per plate and dot shape.

  4. 4

    Print films

    One PDF with every film, or each plate as SVG.

Questions

How are spot colours picked?

The picture is reduced to the number of inks you choose by colour clustering (k-means) — the same picture always gives the same inks. Each ink becomes one film.

What is the white underbase?

On dark garments a white layer is printed first so the colours stay bright. It covers every printed area and is choked (shrunk) a little so it hides under the colours.

Which LPI should I use?

Screen printing usually uses 35–65 lpi depending on mesh (45 lpi on 230 mesh is common). Offset on coated paper uses about 150 lpi, newsprint about 85.

Why different angles?

Each plate gets its own screen angle so the dots do not make a moiré pattern. Process defaults are C 15°, M 75°, Y 0°, K 45°; you can change any plate.

Are the films vectors?

Halftone films are vector dots in a PDF or SVG at 1:1, with registration marks and a label. Solid (non-halftone) plates are exact 1:1 bitmaps.